Highlight your sword and display it proudly on the wood grain finished universal sword plaque. The included hooks can be installed in multiple configurations using the easy guide holes on the back. This display will accommodate almost all medieval styled swords and more. It measures approximately 10" x 9". The colour hue and grain pattern may vary slightly from piece to piece.
Mounting the Hooks
Lay the plaque face down on a scrap piece of wood and then position the sword centred between the hole guides to where it looks best.
Put the included hooks in the nearest guide holes to ensure they are positioned to hold the guard then mark the holes
Use a 3/32” drill bit (not included) and drill a hole through the face of the plaque from the back, through the marked guide holes. You can use a punch or pick but drilling will give you a cleaner result.
Screw in the hooks on the front and mount it to the wall with screws and anchors rated for your wall material!
Whats in the Box
1 - Sword Plaque
2 Mounting Hooks
Photo Gallery
Front - The grain and color hue can vary slightly fom piece to pieceBack - The reverse side has many holes to line up your guard so it is positioned just rightSword Display - Mounts your swords to a wall (sword not included)Install Instructions - Quick and simple set up for all types of swords
Ready to Order?
Product Code: 948
Price:
$19.99
Stock:
Out Of Stock
We can notify you when these become available. Out of stock items are normally re-stocked within 3-4 weeks unless they are backordered with the manufacturer or otherwise stated in the description. We will notify you when this product is available.
If you have ordered this product, we will process payment and ship them as soon as they are available.
All ratings & reviews are from verified customers read more
4/5 average from 45 reviews
Reliks Customer Reviews
Reviewed by owners of this product
"I was a bit disapointed with it. Mine had a scratch." - Julie (2/5)
Reliks Response - We have addressed the quality concerns with the manufacturer. We are now opening and inspecting each piece before they are shipped.
"Of the two plagues I ordered, the other had some chipping on the display side. More importantly, the plague design has an inherent flaw. It has multiple holes drilled on it for the hooks, but the holes are larger than the hooks thus making it impossile to actually use them." - Olli-Matti (2/5)
Reliks Response - We have added installation instructions to the listing. The holes are drilling guides and are only half depth so you can line up the proper sized drill bit.
"Quality has gone down in the last five years, not your fault. " - Steve (2/5)
"looks good for displaying sword. excellent value for the money spent." - Constantin (5/5)
"The plaque had a little "ding" in it, but since that was covered by the sword blade when hung, I didn't return it." - Paul (3/5)
Reliks Response - Sorry about that, I'm glad it worked out ok for you.
"It's nice looking but came without wall screws and anchors. Not really universal only for smaller swords." - Kevin (2/5)
"could use some slightly bigger, or more versitile hooks " - Jason (4/5)
"Acceptable quality, easy to install, good for getting swords off the floor." - John (4/5)
"Never a disappointment. Always quality prodigués with quality service " - Jason (5/5)
"The plaque is well made and adjusts to hold the sword safely." - Todd (5/5)
" The plaque is nice but the two pieces of metal to hang the sword on look cheap in comparison " - David (2/5)